|
The Build ~ August 2010 - December 2010 |
1963 Chevy II Nova 292 Conversion
|
August Details:
⇐
|
|
|
|
12.16.10 - 12.31.10 ~ More wiring, throttle brackets modifications, tv cable bracket fabrication |
|
- Wiring
- wiring for fuel pump and gauges done execept for sending units
- Throttle Bracket
- material removed from arem and throttle rod bent - now clears headers
- TV cable
- custom bracket fabricated. Secondary bracket fabricated to attach cable to offenhauser 'T'
- Parts search
- purchased correct upper radiator hose (Dayco 70443)
- still searching for correct PCV valve/grommet combo
|
|
10.24.10 - 12.5.10 ~ More wiring and shift linkage setup |
|
- Wiring
- ran wiring for fuel pump
- made jumpers for fuse blocks
- made wiring harness to attach gauges to fuse block
- Shift Linkage
- figured out length and setup for shift linkage
- install shift indicator
- TV cable
- custom bracket will need to be fabricated
- Throttle Linkage
- figured out rear header interferes with throttle arm. Throttle arm will be modified.
|
|
08.16.10 - 09.04.10 ~ Gauges, wiring, and engine install |
|
- Gauges
- researched, purchased, modified (angled brackets), and mounted gauges
- Trunk
- Parking brake handle
- Fuel pump and gauge wiring
- fuse blocks and wiring purchased
- Flexplate & dowel pins issue
- New flexplate purchased, modified (dowel pin holes drilled, flexplate bolt holes enlarged), and installed
- Dowel pins shortened (hitting torque converter)
- Engine and Transmission Installed
- Mocked up Radiator Overflow mounting
|
|
07.25.10 - 08.15.10 ~ Heaterbox, trunk, and fan cleanup & refinishing |
|
- Heater
- disassembled and flushed out heater core
- rust removed (evapo-rust) and sprayed with rust converter
- repainted and new gaskets and heater blower resistor installed
- Fan
- rust removed (white vinegar) and sprayed with rust converter
- repainted
- Trunk - prepped and painted with splatter paint
- Purchased
- Heater Box Seal Kit
- Heater Hose Clamps
- Caulking sealer
- 700R4 shift Indicator lens
- Recirculating radiator overflow
- Gauges - tach, water temp, transmission temp, & oil pressure
- trunk mat
- fuel filler tube
- transmission cooler lines (braided stainless) & AN fittings
- torque converter
- Researched 292 - 700r4 - starter compatibility issues
|
|